Burst Pipe A Comprehensive Guide 2023

What to Do When You Encounter a Burst Pipe? A Comprehensive Guide 2023

A burst pipe is one of the most common plumbing problems in a home. It can result in water damage, mold growth, and even electrical risks. If you come across a burst pipe, you must act quickly to limit the damage and prevent subsequent complications. Here are some things you should do if you have a burst pipe.

What Causes Pipes to Burst?

There are many possible causes of pipes bursting, but some of the most common ones are:

Frozen water pipes: If the outside temperature falls below freezing for an extended period of time, ice may form in your water pipes. As the ice expands, it exerts strain on the pipe walls, causing them to split or rupture.

Corrosion: Pipes can corrode over time owing to chemical interactions, water quality, or age. Corrosion weakens the pipe material, increasing the likelihood of leaks and breakage.

Encroachment of tree roots: Tree roots can grow into your pipes and cause clogs or breaks. This can lower water flow while increasing water pressure in your pipes, resulting in breaks.

Soil movement: Due to earthquakes, landslides, or construction, soil movement might cause your pipes to bend or break. This can also cause damage to the pipes’ joints and fittings.

High water pressure: Excessive water pressure in your pipes might stress them and cause them to rupture. Faulty valves, pumps, or regulators, as well as obstructions in your pipes or fixtures, can all contribute to high water pressure.

Clogs: Grease, hair, food scraps, and other debris can cause clogs in your pipes. Clogs can restrict water flow and cause pressure buildup in your pipes, which can lead to bursts.

Movement and hammering: Pipe movement caused by temperature fluctuations, vibrations, or water hammer can cause cracking or breaking. Water hammer is a loud banging noise made when water in your pipes abruptly stops or switches course.

How to Prevent Pipes from Bursting?

Maintaining pipes routinely and shielding them from dangers is the greatest approach to stop pipes from exploding. Here are some recommendations for avoiding pipe bursts:

Insulate your pipes: Insulating your pipes will assist keep them from freezing in the winter. To wrap and warm up your pipes, use heat tape, heat cables, or foam sleeves.

Examine for corrosion: Look for corrosion in your pipes by checking for discoloration, rust, leaks, or a drop in water pressure. Replace your pipes as away if you see any corrosion.

Keep tree root away: Keep tree roots out of your pipes by routinely trimming your trees and avoiding placing them there. To stop roots from encroaching on your pipes, you can also employ root barriers or chemical treatments.

Stabilize the Soil: Make sure your pipes are securely supported and anchored if you reside in a region where soil movement is a problem. Additionally, flexible connections or pipes that can endure soil movement are an option.

Adjust the water pressure: Use a gauge to measure the water pressure in your pipes and make sure it is within the required 40 and 60 psi. Install a pressure regulator or modify the one that is already there if the water pressure is too high.

Clear the clogs: Steer clear of pouring anything that can clog your pipes, like grease, hair, food scraps, or paper products, down the drain. To unclog any clogs that may develop in your pipes, use a plunger, a snake, or a drain cleaner.

Secure the pipes: Ensure that the pipes are securely fastened to the walls, floors, and are not susceptible to vibration or movement when water is flowing through them. Another option for preventing water hammer is to install shock absorbers or air chambers.

How to Deal with a Burst Pipe?

If you encounter a burst pipe in your home, you need to act quickly and follow these steps:

Shut off the water supply : Find the main water valve and promptly turn it off to stop the flow of water. By doing this, the water flow from the burst pipe will be stopped, minimizing damage.

cut off the electricity: At the main breaker box, cut off the electricity if the burst pipe is close to any electrical outlets, switches, or appliances. By doing this, fire and electrocution risks will be reduced.

Drain the water: To remove any remaining liquid from your pipes, turn on every faucet in your house and flush every toilet. Additionally, this will lower the pressure inside your pipes and stop subsequent pipe bursts.

Find the burst pipe: Keep an eye out for water stains, puddles, or dripping sounds that could indicate a busted pipe. To access the pipe, you might need to take some drywall, flooring, or insulation off.

Repair or replace the pipe: The pipe can either be repaired or replaced, depending on the severity of the damage. You can use a patch kit, a clamp, or a sleeve to make the repair. The pipe might need to be completely replaced if it is seriously damaged. Either do it yourself or get a qualified plumber for assistance.

Restore the electricity and water: After the pipe has been repaired, turn on the water supply and look for leaks. Turn on the electricity and check your appliances and fixtures to make sure there are no leaks. You’ve dealt with a burst pipe successfully if everything goes according to plan.

Clean up and dry out : Dry off after cleaning up any spilled water or debris that may have resulted from the burst pipe. To dry out the affected area, use dehumidifiers, fans, towels, and mops. Aside from that, you could also need to replace any broken materials, such insulation, flooring, or drywall.


A dangerous plumbing issue that can result in significant damage and annoyance is a burst pipe. By doing these actions, you can both stop pipes from bursting and properly deal with them if they do. Please get in touch with Prime Plumbers London if you require any assistance with your plumbing problems. For all of your plumbing and heating needs, we provide quick and dependable service based on our ten years of plumbing experience.